TWIN 65 (Reference-Nr. 160126)

•  
  Número de referência 160126

  Ano de construção 1999

  Horas de serviço Não especificado

• Fornecedor

  DMG MORI Global Marketing GmbH
  Walter-Gropius-Str.7
  80807 München

  Germany

  

• Categoria principal

  Máquinas para trabalhar metais

• Categoria

  Tornos

• Tipo de máquina

  Tornos de torre e tornos automáticos

• Produtor

  DMG MORI

• Comando

  Siemens

• Descrição

  
  

  General
  Two- Spindle Turning Centre; Control: Sinumerik 840C
  Tool holder 2
  Number of tool stations	12
  Shank diametre according to DIN 69880	30 mm
  Number of driven tools	12
  Speed max.	-4000 rpm
  Power max. (100% DC)	5 kW
  Power max. (40% DC)	6,5 kW
  Tool holder 1
  Number of tool stations	12
  Shank diametre according to DIN 69880	30 mm
  Number of driven tools	12
  Speed max.	-4000 rpm
  Power max. (100% DC)	5 kW
  Power max. (40% DC)	6,5 kW
  Slide 3 (Spindle 2)
  Longitudinal stroke	600 mm
  Rapid traverse Z	30 m/min
  Feed rate torque (100% DC) in Z	700 daN
  Slide 2
  Longitudinal stroke	555 mm
  Transverse stroke	190 mm
  Rapid traverse X	20 m/min
  Rapid traverse Z	30 m/min
  Slide 1
  Longitudinal stroke	555 mm
  Transverse stroke	190 mm
  Y axis, vertical	+/- 40 mm
  Rapid traverse in X	20 m/min
  Rapid traverse in Z	30 m/min
  Rapid traverse in Y	7,5 m/min
  Feed rate torque (100% DC) in X/Y/Z	400/700/700 daN
  Main drive 2
  Type of main drive	AC
  Drive power (100% DC)	14 kW
  Drive power (40% DC)	18 kW
  Speed range	31 - 6300 rpm
  Bench speed	1000 rpm
  Max. torque (40% DC)	130 Nm
  C-Axis Speed	250 rpm
  Torque of C-Axis (holding torque)	120 Nm
  Input precision of C-axis	0,03 degree
  Main drive 1
  Type of main drive	AC
  Drive power (40% DC)	28 kW
  Drive power (100% DC)	21 kW
  Speed range	25 - 5000 rpm
  Bench speed	850 rpm
  Max. torque (40% DC)	320 Nm
  Torque of C-Axis (holding torque)	200 Nm
  C-Axis Speed	250 rpm
  Input precision of C-axis	0,03 degree
  Work spindle (right)
  Spindle nose	Flat flange
  Diametre of spindle nose	140h5 mm
  Bar diametre	42 mm
  Spindle diametre on front bearing	90 mm
  Work spindle (left)
  Spindle nose	Flat flange
  Bar diametre	65 mm
  Diametre of spindle nose	170h5 mm
  Spindle diametre on front bearing	120 mm
  Working area
  Swing diameter over guide ways	240 mm
  Turning diameter	200 mm
  Distance between spindles	800 mm
  Floor space/Weight
  Dimensions (L x W x H)	4,8 x 2,25 x 1,95 m
  Weight approx.	6500 Kg

• Especificação

  
  

  Hollow clamping attachment Ø 65, left	hydraulic hollow clamping attachment, inner dia. of draw tube max. Ø66 mm (Ø2.60 in), draw force 45kN (10,116 lbf) at P max. 80 bar (1,160 psi)
  Partial hollow clamping device, right	diameter 45 mm (2.6 in), partially hollow 625 mm deep
  Chip conveyor	Hinged plate slat type chip conveyor
  Coolant supply through the spdl, sub-spdl	coolant supply through the main spindle, for sub spindle
  Add. high pressure coolant pump, 20 bar	additional high-pressure coolant pump, additional 300 l (79 gal) tank, p = 30 l/min at 20 bar (7.9 GPM at 290 PSI) including lifting pump and float switch
  Adjust. comp. stop in hollow clamp. dev.	adjustable component stop, mounted inside the hollow clamping device
  Oil mist extractor, IFS, IFM (1800 m³/h)	oil mist extraction by mechanic industrial filter, IFS, type IFM 1800 m3/h (63570 ft3/h)
  Parts catcher for bar components	part collector for bar components
  Signal lamp, triple, coloured	Signal lamp, triple, coloured Signal lamp mounted above the machine cover on a vertical pipe. Three operating states of the machine are displayed via the control lamp

• Estado

  Usado