MIKRON A 331

•  
  Número de referência 1049-448351

  Ano de construção 1985

  Horas de serviço Não especificado

• Fornecedor

  Hans-Jürgen Geiger Maschinen-Vertrieb GmbH
  James-Watt-Straße 12
  72555 Metzingen

  Germany

  

• Categoria principal

  Máquinas para trabalhar metais

• Categoria

  Máquinas de corte de engrenagens

• Tipo de máquina

  Máquinas de fresar engrenagens

• Género de máquina

  Máquinas de fresar engrenagens horizontais

• Produtor

  MIKRON

• Dados técnicos

  max. wheel diameter

  80 mm

  gear width

  150 mm

  max. module

  2,5

  min. module

  total power requirement

  10 kW

  weight of the machine ca.

  2400 kg

• Descrição

  M I K R O N (Switzerland)
  Fully Automatic Gear Hobber for Worm Gears
  Model A 33 / 1 Year 1985 Ser.-No. 14.06/14.07/14.15
  ____________________________________________________________
  
  max. gear- without feed magazine approx. 80 mm
  max. gear- with feed magazine approx. 50 mm
  Module max. 2, / 2,5
  
  Axial milling length approx. 150 mm
  max. workpiece-mounting length approx. 200 mm
  
  Milling slide can be swivelled up to 90 degrees
  Milling cutter - 24 - 50/63 mm
  Max. radial distance of milling slide 0-14/18 mm
  Milling cutter adjustment max. 25 mm
  Milling cutter speed 212 - 2.000 rpm
  
  Axial feed range infinitely adjustable 0,05 - 4,0 mm/workpiece rotation
  radial infinitely adjustable 0,2 - 200 mm/min.
  
  Milling spindle drive 3 kW
  Total electrical load approx. 10 kW - 50 Hz - 380 Volt
  Weight approx. 2.400 kg
  
  Accessories/Special Features:
  " Fully automatic operation cycle and minimum idle times due to programmable
  SIEMENS Program Controls S 5 for all machining steps i.e. rapid gear, feed, milling cutter on/off
  for the loading device, tailstock, possibly shifting, etc. with unit counter, program numbering
  including 30 different numeric error displays
  Pneumatic workpiece-loading and unloading facility parallel to work piece axis upright for rod workpieces approx. 140 mm long x 8 mm , including pneumatic double gripper for
  loading and unloading of work pieces. Raw parts are inserted into change cassettes externally and then placed into the loading device. The double gripper places the parts between workpiece spindle and tailstock,
  the tailstock spindle sleeve pushes the parts in the main spindle collet and clamps them simultaneously.
  The finished parts are ejected from the main spindle, then placed back again into the finished parts cassette by the gripper.
  The whole process is electrically monitored and checked.
  The complete loading facility is encased by plexiglass.
  " Hydraulic work piece clamping device including collets and hydraulic ejector
  " separate cooling system with magnetic separator * separate hydraulic system * various change gears
  
  This machine is set up for worm gears/armature shafts that can be used for adjustable
  car seats, window lifters, etc.
  
  
  
  This ad was created with MODUL MWS - the software solution of LogoTech.

• Estado

  Usado