Bevel Gear Generator - Spiral OERLIKON C28

•  
  Número de referência 1113-235013

  Ano de construção 2000

  Horas de serviço Não especificado

• Fornecedor

  HD Werkzeugmaschinenhandel GmbH
  Robert-Bosch-Straáe 1
  35460 Staufenberg

  Germany

  

• Categoria principal

  Máquinas para trabalhar metais

• Categoria

  Máquinas de corte de engrenagens

• Tipo de máquina

  Centros de maquinagem de engrenagens cónicas

• Produtor

  OERLIKON

• Descrição

  max. wheel diameter:275 mm
  gear width:55 mm
  max. module:6,5
  min. module:1,5
  
  Face Hobbing-Continious Process
  
  Continuous process: The workpiece and tool (usually Spiron) rotate at the same time, and all teeth are created in one operation at the same time. Knife head has several knife groups (not arranged in a circle) Parallel tooth Conical tooth tip surface
  
  Single Item procedure: The workpiece is stationary and the tool (usually Arcon) rotates and cuts a tooth by immersing the tool. Once a tooth is cut, the tool moves out of the tooth again, the workpiece divides by one tooth width and the next tooth is cut until all teeth are finished. Knife head has arranged all knives in a circular path. Conical tooth height Parallel tooth head surface
  
  C28 can do both, wheel + pinion. However, a C28 must be ?prepared? for the individual part procedure. I.e. direct measuring system + part gear brake, workpiece axis + license file for the production of individual parts.
  
  

• Estado

  Usado