DMF 260|11 (Reference-Nr. 030322)

•  
  Número de referência 030322

  Ano de construção 2023

  Horas de serviço Não especificado

• Fornecedor

  DMG MORI Global Marketing GmbH
  Walter-Gropius-Str.7
  80807 München

  Germany

  

• Categoria principal

  Máquinas para trabalhar metais

• Categoria

  Fresadoras

• Tipo de máquina

  Fresadoras de leito com suporte ajustável

• Produtor

  DMG MORI

• Comando

  Heidenhain

• Descrição

  
  

  General
  in travelling column construction NEW DMG MORI Design swivel head (B-axis) tool clamping according to DIN 69872; Control: CELOS with Heidenhain TNC 640
  Working area 1
  Cross	1100 mm
  Longitudinal	2600 mm
  Vertical	900 mm
  Tool changer
  Type of magazine	Chain
  Type of gripper	Double gripper
  Number of tools	60
  Max. tool weight	15 Kg
  Max. tool length	500 mm
  Max. tool diameter with occupied adjacent pockets	115 mm
  Max. tool dia. with free neighbouring pockets	160 mm
  Technical Data
  Feed rate longitudinal/transverse/vertical	40000/40000/40000 mm/min
  Rapid traverse longitudinal/transverse/vertical	80/60/60 m/min

• Especificação

  
  

  Direct measuring system	Direct path measuring system
  Cabine	Full protection cabin
  Dynamic package for DMF 260 linear (Y1100)	Dynamic package for DMF 260 linear (Y1,100 mm) linear drive X-axis with 80 m/min // 262.48 ft/min rapid move XYZ 80/60/60 m/min // 262.48/196.86 ft/min, Acceleration XYZ 5/6/6 m/s² // 16.4/19.68 ft/s² Active chiller for main spindle and Linear motor mag
  Rigid table with integrated rotary axis (leftside)	Rigid table with integrated round table d 1050 mm // 41.3 in, located in the left working area table load max. 1,200 kg// 2,644 lbs hydraulic clamped in position
  	Table surface 3200 x 1100 (Ø 1050) mm
  	Number of Slots 9
  	Slot width 18 mm
  	Distance between T-Slots 100 mm
  	Rotation speed max.4. Axis 50 rpm
  Removable partition wall DMF260 (Y1100)	Partition wall removable for pendulum machining DMF260, 2 working spaces (possible with integrated round table)
  Tool magazine 60 places SK50/HSK-A100	Tool magazine 60 places SK50/HSK-A100 Chain type with double gripper
  Spindle speed 20 - 10,000 rpm	Spindle speed 20 - 10,000 rpm HSK-A100 for tool taper according to DIN69893 with power 44/32 kW // 59.0/42.9 hp with torque 288/187 Nm (40/100% ED)
  3D quickSET elevated constructuion	3D quickSET Tool kit for control and compensation of the cinematic accuracy of 5 axis machine configurations include additional fixture for elevated construction (only with option touch probe)
  Oil mist separator	Oil and emulsion mist separator system 2 pieces per machine implemented in right and left cabin side wall. mechanical filter system 2x1600 m³/h
  Signal lamp 4-colour	Signal lamp 4-colour Red: general error Yellow: intervention necessary Green: automatic mode Blue: set-up mode
  Air blast through spindle centre	Air blast through spindle centre activated by M function, maintained air, low oil rate possible
  Inner coolant supply 40Bar/980l	Internal coolant supply (ICS) with paper type filter 40 Bar/980 l // 580 psi/258.8 gallon inclusive 2 rotating clear window, air purge for linear measuring system, rotary joint for main spindle
  Chip flushing for working area	Flushing for working area Additional flushing of the working area doors and cabin sidewalls, Bed flushing included
  Door drive for working area doors	Door drive for working area doors Open / close - activated by two-hand-operation at the control panel Safety sensor technology for prevention of accidents
  MPC Machine Protection Control	MPC Machine Protection Control Machine protection by quick shutdown
  Application Tuning Cycle ATC	Application Tuning Cycle ATC programmable feed parameter selection for machining task: accuracy/surface/speed
  Operation mode 4	Operation mode 4 Process monitoring in the production Manual intervention with open doors of machining area. Release after check list has been filled in.
  Digital Manufacturing Package	Digital Manufacturing Package (1) IoTconnector Allows the use of the Online services from DMG MORI (2) Machine Data Connector (MDC) Standardized machine data interface Protocols: OPCUA, MTConnect, MQTT (3) NETservice Qualified support through internet-b
  Messenger V4	The latest version of DMG MORI Messenger displays web based the machine live status. It allows to analyze the machine run-time, downtime, alarms in individually configurable dashboards and transparently shows the actual status in the manufacturing shop
  Service Agent	Service Agent Overview of all maintenance work on the machine

• Estado

  Usado